Showing posts with label cups and tumblers. Show all posts
Showing posts with label cups and tumblers. Show all posts

Wednesday, September 10

Tom Cruise and tumblers

I had the same issue with the washed out black on these tumblers. But I hope to have better luck next time with what I'm learning from the book.

Three more tumblers. I love making tumblers for some reason.

So I've decided to forgive Tom Cruise. I've had a bit of a grudge against him now for a while. Maybe two years. It all started because of a little conflict on South Park. I've watched the show enough to have an idea of the humor, much of it juvenile, tasteless and not funny. Much of it juvenile, tasteless and really hilarious.

The thing I like about South Park is that they make fun of everything and everyone, and like it or not, sometimes they are dead-on with the views they present. They spent an entire episode mocking what can easily be seen as the ridiculousness of blindly believing in the story of the beginning of Mormonism without questioning. However, they also end the episode kind of saying, but hey, we should all tolerate each others beliefs. I'm probably telling you what you already know, but they make fun of every religion, every race, every idea of sex and what ever else might be out there.

So when the episode "Trapped in the Closet" satirizing Scientology came around, no one should have been surprised, or any less, or more offended, than by any other episode. Certainly not Isaac Hayes, who for nine years had no problem participating in a show while they mocked every other religious belief. A few months after the episode aired, he asked to be released from his contract with the show because he felt that making fun of someone's (his) religion was intolerant and bigoted. I personally think he was being a hypocrite (no offense to his memory or him personally) , but it was his choice.

Enter Tom Cruise (also a Scientologist) who was portrayed in the episode. Now this next detail is why I lost a lot of respect for him and began a two year boycott of his movies (I still haven't seen MI 3, although I love Philip Seymore Hoffman and wanted to see it for his performance alone). Cruise took his outrage to another level. He threatened Paramount saying that unless they agreed they would not rebroadcast the episode that he would not promote the MI3 movie. This just really bothered me, because anytime I see someone trying to promote censorship it just outrages me-a good topic in itself for another day.

So the other day we went to see Tropic Thunder, a movie that has had it's own share of criticism stemming from jokes at the expense of people with mental disabilities. I kind of cringed at some of the things said, so I can see why some might be offended-some people were also outraged because Robert Downey Jr. was playing a black man (which by the way he was great in-as usual). But I'm digressing. The surprise performance in the movie was by none other than Mr. Tom Cruise himself. If you don't know he's in this movie going in, it might actually take you a minute to realize who he is. He does a really great job with his character and I found myself enjoying the performance, and thinking it was time to let go of a grudge. We are all, after all, human, imperfect little people, and even the super-humans like Cruise sometimes do and say regrettable things (regrettable in my opinion anyway).

So I think I will finally rent MI3, and get on with my next boycott. If I could only stop eating meat and cheese again . . . talk about a hypocrite!

Friday, September 5

Flowers and a dirty floor

Still another couple of pieces from last firing. These are some better photos I tried to take. I still need to work on my lighting a little. I'd like to find three of those cool-burning photos lights. I just need to get off my butt and do it. The tumbler below is pretty big actually. It could be used as a vase.


My firing this time was eh-eh. I did not get my main browny-orange glaze on thick enough on many pots. Sometimes they look okay like that, sometimes not. I had maybe a 60% success rate. So that's better than many firings in the past. However, I did have great success refiring two pieces from last firing where the glaze was too thin, so I will try to refire a few of the pots that I really like but didn't quite come out.

I bought something really special yesterday. You have to wonder about my sad little life when something like this pleases me. I bought a commercial style mop bucket and mop. You know the kind where you dunk the mop into a yellow bucket on wheels and and squeeze out the water in the presser thing. It's by Rubbermaid and is really quality. Nice to occasionally buy something nowadays that hasn't been manufactured like crap. So my little setup does a great job of mopping the floor, which was sorely in need.

Saturday, August 16

Wicked awesome test mug #4 results

So, as you can see from my post title I am pretty pleased with these last results. There are still a few issues I need to deal with, but huge potential I think. The blue really looks nice with my palette, and in practice it interfaces well with the other glazes-a huge plus. I got these issues though, you can even see it in this photo above. My white liner glaze blisters unpredictably, or rather maybe too predictably and I am finding the risk of this unacceptable. I am quite certain this is directly related to my clay body. It doesn't behave this way on porcelain, or if I use it over slip. I have a really high iron body and has been difficult finding glazes that co-exist well with it. But it's the best looking and most mature body I have tested. So I need to do something about that.

This cup above is glazed the same way as the one above it. If you click on the picture you might be able to see a nice attribute of this blue however. Where it breaks over edges it shows the dark body, but then fades away from the dark edge into a pale, whitish color, then goes to blue. This gives it a lot of interest I think. I think it probably has to be the right thickness for this to happen. You can see I chose to have a cup of tea in this one.
This matt black and the blue have a real potential together I think. The issue which you can see on the cup below is that I have to be careful not to let the liner glaze become too thick on the rim or I can get shivering. I know this is not a result of the two glazes meeting, because usually it is fine and I have frequently ecountered this issue in the past with the black liner. So, that should be an easy problem to deal with.

So, below is the same glaze combo as way up above, but with the blue as a liner. Unfortunately I got a few pinholes around the inside of the rim. I am first going to approach this as maybe the glaze was too thick because I held it in the cup for several seconds before draining out. So we'll see about that.

Adam gave me an amazing critique this morning. I thought it was very thoughtfully done and very astute/intuitive/perceptive. He was very happy with the mugs and said that he could really see the style and direction that I am going in. He described the work as playful, whimsical and not really "perfect", but in an intentional way. What did he say, something like the work is mature but yet has a child like quality. He said it way better but it really impressed me how thoughtful his critique was. He noticed the blisters and such said he has become really aware of how much more there is to making pottery, than just making the pots. How many issues need to be dealt with etc. He looks at pottery now with a different eye because of what he has learned from living with me, and has become a professional s-crack spotter. I really appreciated his feedback this morning. It was positive yes, but most importantly inspiring.

So I think this blue, if it can stand the test of a few more test firings is going to be a welcome addition to my work. I know I said a few posts back that I was getting rid of blue, but I was glazing a lot of my work in blue allover, and I think my intention now is to just use this to compliment and highlight the cups with a little color sometimes. I can't wait to test these glazes on that test clay. It's bisqueing now. It has this dark brown, reddish quality that I hope might really add to the glazes as it peeks through. AND NO GROG!!!! Oh happy day, to throw with clay with no grog. Okay, bye.

Thursday, August 14

I love you

I'm finally done with these little pots. For such tiny pots, they take a lot of time.


Here's a picture for a size perspective of them.


So, some good news. I think I've got something going on with my handles. I still need to perfect it a little which will come with practice, and I'm not sure how big to make them yet so I tried a few different sizes, but all in all I'm pretty happy with them.


I found this on my bench this morning when I went into my studio. How sweet a way is that to start the day?

Wednesday, August 13

Mug test #3

So, here's the girls from the last test all lined up. Again, some decent stuff, some boring stuff, some puzzling stuff and one possible gem.

This cup above could have some possibilities. However, the white glaze tends to blister and pinhole when it feels like it. I try to be patient with it because I kind of like it, but I'm thinking when I run this huge five gallon bucket out it's gonna go. It's hard to see in this image, but I got blistering where the white overlaps the black, and more significantly, on the other side some major shivering. But I like the graphic quality of the black and white for sure.
This mug above is kind of interesting, in that it is glazed ALMOST exactly like the one below, but I don't like this last one as much. I have figured out a few reasons why, but it is interesting to see what a big change, a subtle difference can make.
This cup above is from the last firing, glazed very much like the one above it. I really like this one.
I kind of like this. Except it's kind of boring. It needs a little pizzazz and I just need to figure out what that could be. But it has potential.


This is my favorite girl of the bunch this time. And standing next to her is my little gem. I am looking for a blue I can use that is sort of turquoisy, durable, not ugly, and works on my body (I have a high iron body and glazes often don't like it). So, I'm kind of diggin it. I think I'll use it in my next set of tests and see what happens. I've tested and rejected a lot of blues.

Today was a long day. Those little cute tiny jars kicked my but. I actually still have three of them left to finish. I never got to the mugs at all. But I did throw the beginnings of maybe eight more pots while waiting for everything to firm up. But still, just one of those days when it doesn't seem like I got a lot done. Especially since the pots I finished are about one and a half inches big. Oh well.

Tuesday, August 12

Cup handles

The other day I was saying how I was having trouble with my handles. I am looking for a handle that has a quality in which it grows from the pot. I really like the handles that have a fatness to them where they attach at the top and the bottom. I probably have to pull them from the cup for this but I'm having a really hard time with that. I tried tonight about six times and had six pretty nasty looking handles. I have one more idea I want to try and if it works out I'll show you what I did. If it doesn't work out and I still have no luck pulling them then I'll probably just post "this sucks!"

So below are a few mugs from 500 cups that have handles with qualities I am after. They're just nice mugs all around really.







Monday, August 11

Mug test #2 and zero common sense

2nd mug test before (above).

after . . . some good stuff, some not so good stuff. I had a few more successes with this firing. A couple of real bombs, but there are a few pots that I would actually sell without too much embarrassment. I also fired a piece of my test clay. Here I'll post a photo of this, it's kind of wierd. The fired test and the raw clay are almost exactly the same color. I don't think I've ever really seen that. At least I haven't, maybe I'm sheltered. The nice thing is that it is really vitrified. Hard, has a nice ting and a slight sheen. Next I'm going to throw a couple of little test pots from the lump and see what some of my glazes look like on it. I'm researching on how to make my own clay from slip and dry it in frames. I've only used a mixer in school, which I don't want to do again even if I had a free mixer. I hated it. If anyone has any advice on things they've learned about the slurry proccess or building frames, how powerful the drill needs to be or whatever, any help would be greatly appreciated. I did read at St. Earth Pottery site about re-inforcing the frames under the fabric with wire mesh which I thought was brilliant.





During my first test firing the other night, Friday I think, I was lying in bed and I head this strange sound. I would have just chalked it up to the cats but since my grandson was over I got up to check just to be sure there were no boogey men lurking about. Fortunately Adam was deep in sleep and so he was safe. While I'm in the living room I hear the sound again and now I can tell it's coming from the basement and I then knew what it probably was.

I had tried to raw fire a piece, but the piece itself was really still somewhat (okay very) much in the leatherhard stage, and when I opened the lid of the kiln, which was at 600 degrees by this point, There was the cup standing perfectly, except for the bottom which had blown itself into a million fragments, some landing in the bowls of the cups on the same shelf. I really didn't want to stop the firing and if it had been much hotter I probably would have had to, but instead I threw common sense to the wind and pulled the pieces out, dumping the broken fragments from them, pulled the shelves out and dumped those clean and assessed that the bottom layer was fine. There didn't seem to be a bunch of pieces logded into the element channels so I loaded back up and continued on, the kiln chugging away the entire time. This was a little hot as you can imagine and so I had to handle things quickly and set them down before the smoke rising from my gloves turned into intense heat burning my hands. Obviously I would not have done this with a full sized kiln. That would be a wee bit silly.

Saturday, August 9

Mug test #1

These cups above are the fired results of my first test the other day. I arranged them in the same order as the photo from the last firing. I think in the future I might post the images together. In fact, I will do it now. So, below are the mugs again glazed and unfired. Interestingly enough, the fired results are very similar to when they are raw glazed. I have never worked with glazes before that so closely resemble their fired result. It's a little wierd, but helpful in a way. I had a few interesting results. Nothing spectacularly successful, but I'm going to get there slowly but surely as they say

Well, that's about it I guess. I'm going to the League of New Hampshire Craftsmen Fair tomorrow. It's a nine day long fair and tomorrow is the last day. I'm going for research really. I want to check out how all the potters set up their booths and such. I have never done a fair and hope to do this one next year as well as a couple of others, so I need to start preparing.

This fair cost a LOT to enter. First you have to be a member of the League, which I am, and to do the entire 9 days it's 2,000 dollars. Yes, three zeros. You can choose to do four or five days for 1,000. It's a pretty big investment, but with the potential of a huge return. It's very heavily attended and if I'm ready by then, hopefully I'll do well. Never know not trying. This fair is the oldest craft fair in the country by the way.

Below is my second test set waiting to be fired. I can only fit 7 mugs in the test kiln, so I think one has to wait. I've already learned a thing or two on what to do and not do, so hopefully this set will be better than the last and so on.

Friday, August 8

Glazes and . . . glazes

Thought I'd put a quick post up with some color, kind of. I've got six test mugs ready to fire. The absolute maximum I can get in my test kiln is seven, but that's good. It'll force me to do six or seven, learn from the firing and then go again. I am determined to feel like I have at least reasonable control or at least knowledge of what all the glazes are going to do with eachother and have a good idea of what works and doesn't before I glaze any more pots I have invested a lot of time in. Good plan!

One interesting note about these cups. I didn't like any of them when they were just sitting there as a piece of bisque. Now with some glaze on, even unfired glaze, they take on a whole new presence for me. I think I'll write about that later.

These are my five glazes. I know I said I was going to use only four, but two of them are blacks, so I figure that counts as one. One is a shiny black I use for a liner and another is a nice satin-matte subdued black that is nicer for the outside I think. I like that they all look different. It really helps keep my mind from getting a little overwhelmed, as we all know it can sometimes be hard to tell them apart at this stage. This was just luck by the way, not planning. Okay, gotta go. I've got to cut my day short because I am watching my little grandson tonight. That makes me think of another post. Hmmm. More later on, As The Wheel Turns.

On mug handles

I wanted to talk a little about my handles today. Before I get on to the design aspect, as you can see below I have a problem. As I said in an earlier post I would like the option to dip some pots into a white slip. I had concerns I would have issues with pots with attatchments and I was correct. I have absolutely nothing to offer as to how to prevent this from happening. Obviously there is a way around this, otherwise people could not be dipping pots into slips, engobes, and raw glazing. So I need to figure this out. I am going to try and raw glaze one coffee mug to see what happens. I have already glazed the inside of that mug, but now I know I cannot glaze the outside until I have learned a thing or two. If anyone has any advice it would be greatly appreciated.

Below is a detail of a handle. I like the way the handles look in the sense that visually I find them appealing in a surface kind of way. However . . .

The first things about all of these handles I think, is that they don't do anything to enhance the form. They serve the purpose of picking up a hot drink so you don't burn yourself. I can't say that satisfies me. I don't want them to just serve a purpose, I want them to contribute to the form in an aesthetic way-who doesn't. I think right off the bat I know one thing I need to learn to do. Something I have resisted with every fiber of my being for a long, long time. Something which frightens me and makes me want to shake my head from side to side saying no, no, no, no. I need to learn to pull a handle straight from the cup. I'm not talking about pulling handles and then attaching them. I mean the distasteful skill of attaching a partially pulled lug of clay onto the mug, and then pulling from the mug to finish. I think it is safe to say that what I am looking for will be found there. I know this is what I am seeing when I look others handles I appreciate-but I keep resisting and thinking I can figure a way around this. I think I am going to simply have to walk on through instead of around.


So this first mug. I like the shape of the mug but the handle seems more like the handle of a shovel, or something to be used to cantilever the cup. Notice how it, and all of these really are very thin where they attach to the cup at the top. It doesn't feel at all like it has grown from the cup or has a real relationship with the cup other than as something stuck on to help lift it. Boring. It's also kind of high, not that high handles are bad, but why is it high? What does that contribute to the pot? Nothing that I can see.

This second cup I think visually actually works well. Although it still has the issue of a lack of substance and being just sort of stuck on, it seems to grow up from the foot in a much nicer curve, kind of following the curve of the cup a little. Sadly this is not a great handle, but probably one of the most successful from this batch.

This handle below is awful in many ways. Again no feeling of growth from the pot, and it's big but attached in such a way that even with it's size you couldn't really get a few fingers in. It's like a two fingered handle that could fit four fingers in an awkward way. It does follow the curve of the base of the pot pretty well, so I guess it has one redeeming quality.

Yikes, yikes, yikes. Okay I have several similar to this. These are what I am coming to think of as the bad bridesmaid dress handles. Can you see it now? This little mug waddling down the isle with that big bow on the back of it's butt? How embarrassing for it. If I put another one on the other side and a little face it would also make a nice ear.

This handle below I think is just too high. Same lack of prescence and growth from the pot again as well. There is just nothing inviting about these. Nothing that can make you mentally imagine picking up the mug and holding it in your hand.


This handle below is almost successful in a way I think. It has that same lack of growth but I like the shape. However it feels very low to me. I'm probably being a little too hard on this one. I kind of like it, but something is stopping me from really liking it. Maybe if it just had a little more of a substantial attatchment that would do it.

Here again is one of my favorite mugs, except the handle. It suffers from the bow on butt syndrome, but this one sticks out so far I actually think of it more like victorian squeezed into a corset and then something wierd under my dress to make it stick really far out in the back cause it's the fashion syndrome. It looks like it should go have a cup of tea and a crumpet.


So I guess that's about it for now. Thanks for listening to my critique. It actually helps me to figure out what is wrong. I think I might try and post a few images soon of some handles of other potters cups that I feel are successful and try and figure out why. Bye for now!

Thursday, August 7

Mug comparisons

So my idea is to compare some of the mugs from this round. I was going to compare handles, but I thought first I might deal with shape. Many of these look better in the photo I think. Holding them I get a different impression. Keep in mind that this is just what I am looking for in my own work, and I don't believe every successful mug should have these characteristics. I myself enjoy a huge variety of forms and styles from other potters. I'm just looking for something that works for me.

So example 1. Two mugs very similar, but different. I feel the top one is more successful. There is something about the swell of the belly that is a little more inviting and the rim dips in a little making the space feel slightly more enclosed.

Example 2. A similar form but it just sort of sweeps up. It's missing that little indentation above the foot that might give the base a little lift and no belly swell. Also the rim just flares out. It's very open and feels less comforting


Example 3. I feel like the top cup is more satisfying in shape. Again there is a nicer belly swell and a little movement also with a throwing rib.

Example 4 is very similar, but kind of dead on the outside and while there is a little swell, it's up kind of high. It's more like the pot is puffing it's cheeks out rather than taking a breath.


Example 5 is one of my favorites from the group. What do I like about it? Well again the round belly, and although it doesn't dip in a little at the rim it dips in below the rim in a decent curve and the lip has some fatness and nice undulation on the rim as well. Also nice lift at the foot.

Example 6 is missing the boat for me. I don't like the way it sweeps up so severely towards the belly and feels more like someone puffing out their chest rather than, again, taking a breath. Not much undulation, and no flaring out towards the rim. The rim has a nice fat quality, but that's about it. It's just kind of static.

I have many others I could compare today but I'll spare you the redundancy. You get the picture. I know I have been unsatisfied with many of my pots and although I can recognize a good pot it is often difficult to make that transition from my brain to the making. I read this great thing on someone's blog and I wish I remembered who, but she said something like, she was finally getting to the point where her hands matched her heart (she said it way better). I can totally understand that. I know what I am after in a vague way. It may not be an exact shape of a form, but it's a form that is successful in every way. All the parts are working as a whole.

I'll talk about my handles on my next post. I'll be glazing for a while now so won't have any new pots to put up and I don't want to run out of posts in one day!

So, several potters have stopped by to visit my blog and I just want to say hello and thank you to every one who does. I truly enjoy writing knowing you are reading.

Wednesday, August 6

Mug handles and slip

I handled a bunch of mugs today. It was awful. Sometimes this clay is just not plastic. My handles would just keep breaking in half and I'm quite sure it wasn't my application. Right out of the bag sometimes this clay, although it feels a little slippery and even sometimes has signs of mildew (good things to me as far as clay is concerned) when you do the bend test it breaks right in half. I've had this for at least two months so even if it was fresh when I got it it shouldn't be now.

So I was thinking. I'm not thrilled with my handles. They're fine, they don't suck in an obvious way, but a lot of them just are not complimenting the cups. Some look really good and so I was thinking that for my next post I will compare some of the cups and discuss why I think some are successful and why others are not. This will be good for me and hopefully help me figure out what I am after, and hopefully you might enjoy it too.

So I was wondering in my last post about dipping some things into slip but unsure about waxing while the pots were green. I was afraid the wax would trap water and start blistering up. Emily Murphy

responded to my post and said she thought waxing would be fine and it worked great. You may be wondering why I would want to dip my darker stoneware into white slip and I'll tell you. Below you see two test pots glazed with exactly the same glazes outside. The one on the right has been slipped first. It really makes my white pop and my orangy-brown a much brighter orange. I like the one on the left very much. It has a nice earthiness to it, but I also love the brightness of the slipped pot. It makes the pot feel a little more vibrant. I intend to do both and it's nice having the option.

So, stay tuned tomorrow for another episode of One Cup To Handle.